UV resin is a type of resin that cures when exposed to ultraviolet light. It is often used in jewelry making and other crafts.
If you are looking for the Best Uv Resin on the market, then you have come to the right place. There are many different types of UV resin, and choosing the right one can be difficult. But in this Byboe’s article, you will find the right products for your job.
Table of Contents
- 1 Best Uv Resin on Amazon in 2023
- 1.1 1. Joligel UV Crystal Clear Resin
- 1.2 2. Miraclekoo UV Resin UV Curing Hard Resin
- 1.3 3. Limino Store Ultraviolet-curing Epoxy Resin to Make DIY Jewelry
- 1.4 4. YRYM HT UV Resin Kit – 200g Crystal Clear Hard Type
- 1.5 5. UV Resin LET’S RESIN Clear UV Resin For Jewelry Making
- 1.6 6. VidaRosa UV Resin Crystal Clear
- 1.7 7. CHIIRO UV Resin Clear Type Transparent by SAANA
- 1.8 8. DecorRom UV Resin to Make DIY Jewelry Craft Decorations
- 2 What is UV Resin?
- 3 What Should You Look For In The Best UV Resin?
- 4 How Do You Clean UV Resin?
- 5 How to Cast a UV Resin Mold
- 6 Some Tips While Working With Epoxy Resin
- 7 Best Clear Uv Resin: FAQs
- 8 Best Uv Resin: Conclusion
Best Uv Resin on Amazon in 2023
1. Joligel UV Crystal Clear Resin
Joligel UV Crystal Clear Resin does not contain solvents and is safe for jewelry use.
It cures quickly esp. It cures quickly under UV conditions, and within a few minutes, it is hardened and glassy.
It is not necessary to measure or mix the Resin with a hardener. The UV resin for jewelry is a thick material that does not crack over time. The Resin can be used as a sealant. It is seen as the very best UV resin on amazon.
- Solvent-free material
- Smooth surface leaves
- Sticky after use
- It may take longer to treat
2. Miraclekoo UV Resin UV Curing Hard Resin
This UV resin is an excellent choice for jewelry making.
It’s made from a high-quality resin, which is safe and nontoxic.
It is normal to get a slightly pungent smell when the windows are opened. However, Miraclekoo UV resin for jewelry will quickly disappear once you open them. A face mask is an option if the scent is not pleasant enough.
The resin color is clear, and the glassy finish makes it both scratch-resistant and yellow-resistant UV resin. It is also stain and stain-resistant. This likely increases the shelf life.
The surface might still be tacky on top of the cured Resin. I let it rest for 10-20 minutes to cure.
You may also get random bubbles. However, you can use a lighter or a magnifying glass to remove them. Just don’t keep it in one place. You can choose from seven sizes to best suit your project.
It has a mild odor that I detected, but it is harmless and safe to use because it’s made of high-quality, non-toxic materials. It’s great for small jewelry pieces, but it can be cumbersome for more significant amounts.
The miraclekoo crystal uv resin is not the best choice if you want to make large pieces. It can be used to shine up your already-made jewelry. It is seen as the best hard UV resin on the market.
- It is self-degassing and self-leveling
- It cures clear. However, you can add mica powder and alcohol inks to make it sparkle.
- You can choose from seven sizes.
- Made of high-quality, non-toxic material
- It can be applied in just 2-4 minutes to any scratch, stain, or yellow-resistant surface.
- Low-medium odor. But not overwhelming
- After curing under UV light, the surface will remain tacky for some time.
3. Limino Store Ultraviolet-curing Epoxy Resin to Make DIY Jewelry
It is the best UV resin for jewelry. This UV resin is a high-quality material and cures to an anti-scratch, yellowing-resistant, and anti-stain surface. It is easy to pour, and it settles well in jewelry molds.
It is self-degassing, but I recommend slowly pouring it to avoid any bubbles. It’s safe to use because it’s nontoxic. The smell is not too strong, but it completely disappears after curing.
It cures in a matter of minutes under a UV lamp. However, a minimum 36w UV lamp is required to avoid being sticky and tacky. Depending on the weather, it can also be placed in sunlight for between 10-60 minutes.
This UV resin for jewelry is glossy and transparent once it cures. However, you can add color/tint or shine to the surface with mica and glitter. It is best not to touch the cure for at least a minute. It is exothermic and heats up quickly.
- It cures transparent and glossy without bubbles
- Made of high-quality, non-toxic materials
- It can be treated to an anti-scratch and anti-stain surface.
- It is easy and quick to pour.
- You only need to wait for 2-3 minutes under a UV light to cure fully.
- To add color and shine, you can use mica powder or glitter
- After curing, there is a slight smell that disappears.
4. YRYM HT UV Resin Kit – 200g Crystal Clear Hard Type
This UV resin is the best wattage for UV resin for money. This UV resin is very affordable. It also comes with valuable bonuses such as a silicone cup; stirring eliminates bubbles stick, stir stick spoon, and a beak covering. Everything you need is included.
This Resin is fragile in viscosity. It’s almost like working with water. It is easy to knock it over and spill.
It is thin, so it doesn’t have any odor. It is also super easy to mix and use. However, it takes the longest time to cure. It was tacky and flexible after placing under a 36 watt UV lamp for 20 minutes. It takes a few hours to cure.
Apparent cures, but you can also add mica powder, colorants, and glitter to make it shine. It is easy to mix and distribute, while the bubble stick eliminates stubborn bubbles.
It is made of high-quality, non-toxic materials and cures smooth and glossy to an anti-scratch and anti-stain surface.
It won’t cause damage to your project because it has low shrinkage. This is an affordable, high-quality uv resin for jewelry. It is seen as the very best resin curing uv.
- It is very affordable and comes with some valuable bonuses.
- It’s super simple to mix, pour and use.
- It is free of any odor and can cure crystal clear.
- It can be cured to an anti-scratch and anti-stain surface.
- It is nontoxic, and it has low shrinkage
- You can also add mica, colorants, and glitter.
- The top is heavy and can be knocked over easily.
- Because it is thin, it takes a while to cure, so it must be handled with care.
5. UV Resin LET’S RESIN Clear UV Resin For Jewelry Making
This is the best UV-resistant epoxy resin for a low price. This UV resin is made of non-toxic, premium quality material. It also has a low odor, so that you will have no problems working with it.
This Resin is thicker, which means it has less runoff and provides more coverage. It pours easily and settles well in jewelry molds.
The nozzle tip is excellent, and the bottle has a squeeze-able cap. It cures clear like expensive brands, but it takes much longer.
It takes just a few minutes to cure under the UV lamp fully. After that, it will take a few hours/days of sitting for it to cure fully.
This is an option for those who are comfortable waiting. To add color, you can use mica or metallic powders. However, this ink should not be used with alcohol inks.
It cures quickly to create a scratch-resistant surface due to its low shrinkage. This Resin is resistant to yellowing and offers a 60-day exchange policy. You also get a 30-day money-back guarantee. If you are looking for the best price UV resin, you should try it.
- Decent Resin at a low price
- Made of premium, non-toxic materials
- The thick consistency provides more coverage and less runoff.
- It cures crystal clear, but it mixes well with mica and metallic powder.
- Available with yellow-resistant
- You can exchange it within 60 days or get your money back.
- Initial symptoms are tacky, and it takes a few hours/days for the condition to heal fully.
6. VidaRosa UV Resin Crystal Clear
This resin is suitable for thicker and larger objects. The resin cures quickly and is transparent. This UV resin has the advantage that children can use it without adult supervision.
Although it can be a bit spicy, the resin does not foul odor once it is cured. This UV resin shines like crystals and is easy to clean. This resin is ideal for making handmade jewelry.
It cures quickly has better transparency and lower viscosity. VidaRosa resin can be mixed with other pigments to create the color you want for your jewelry.
It is transparent, so it does not create too many bubbles. It is safe and non-toxic. It is easy to get rid of the resin using soap or rubbing alcohol.
- Safe for children
- It is easy to clean and take out
- Sticks quickly
- It is simple to use
- Not quite consistent
- Foul Smell
7. CHIIRO UV Resin Clear Type Transparent by SAANA
This UV Resin can be used in jewelry. It cures jewelry without bubbles. It can be used for both soft and hard materials. Its main characteristic is its consistency. This resin has many advantages. You can make almost anything you want with it without the assistance of anyone else.
This resin can be used for handmade or machine-made jewelry. This UV Resin is one of the most popular. It can be mixed with UV resin dyes, glitters, or other materials for jewelry, decorations, coatings, and resin paintings.
It can be used to cure any smooth, crystal-clear surface. It is also anti-scratch and anti-stain. It also has yellowing resistance.
It requires a cooling period of between five and seven minutes for the UV resin to cure. Mixing it with pigment dye will require more time.
Many UV resins have an unpleasant odor that can be irritating. Although this UV resin can leave behind an unpleasant odor when used, it doesn’t last once it has cured.
- Widely used
- Extra-long curing time
- Use of odors
8. DecorRom UV Resin to Make DIY Jewelry Craft Decorations
This UV resin is excellent for jewelry. However, make sure to use transparent molds. The Resin comes in a convenient, squeeze-and-useable bottle that you can easily use. It is thick and doesn’t flow too fast.
It is easier to fill resin molds with the precision tip. It did have a strong smell, but it was not as bad as I thought.
The UV resin is crystal clear and hardens under UV light in 90 seconds. You can also add mica powder, alcohol, or glitter to make it shine.
It mixes well and holds color well. You can leave the dye on for up to 180 seconds to be safe.
The UV resin can be used to cure a scratch-resistant, stain-resistant, and yellowing-resistant surface. This UV resin will make your jewelry solid and safe. It is made of high-quality, non-toxic materials.
Many people use it to coat polymer clay jewelry. What’s the best thing? The best part? It comes with a 100 percent money-back guarantee.
- It is thick and not runny, and it levels well.
- It cures crystal clear mixes well with alcohol inks, glitter, and mica.
- In 90-180 seconds, cures are crystal clear.
- It is scratch-resistant, stain-resistant, and yellowing-resistant.
- Made of high-quality, non-toxic materials
- You get a 100 percent money-back guarantee
- This only works well in transparent molds.
- After curing, there is a slight smell that disappears.
What is UV Resin?
There are a few differences between the epoxy resin and UV epoxy. While the epoxy resin is composed of two liquid components (a resin and a hardener), which harden by the chemical reaction after being combined, UV resin doesn’t require mixing.
The UV resin will stay in its liquid form until it is exposed to ultraviolet light. You don’t have to worry about preparing your resin in a specific timeframe as the UV light will cure it. After your resin has formed the desired bond, you can apply the UV light to cure it in a matter of minutes.
Casting thin layers of this resin is the best way to ensure it cures properly. You should not exceed 3mm in thickness and allow each layer to cure before applying the next fully.
Although UV resin can be used for small projects and provides quick results, it is not as durable as epoxy resin. UV resin is different from epoxy resin because it is not heat- and scratch-resistant. It will not last as long.
What does UV Resin do?
Although UV resin has many benefits in processing and application, you should also be aware of its drawbacks.
UV resin can be used in small quantities and for specific applications. Because of its quick curing time, UV resin can create uv resin for jewelry pieces.
- It is no longer necessary to mix resin and hardeners strenuously.
- You can use it for a long time because it cures using a UV lamp.
- With the aid of ultraviolet light, UV resin can be quickly cured.
- It has a shelf-life of six months.
- For curing, a particular type of UV light is required. The radiation from the sun doesn’t work ultimately.
- You should limit the number of layers to three to four millimeters. Safety reasons require that you cast multiple layers.
It is more expensive than an epoxy resin.
Types of Resin
There are two main types of UV resin: hard and soft. Both come from Cationic epoxy Uv Resin.
Hard Resin: This hard resin is hardened under direct sunlight and UV light. It comes in both thick and thin versions.
Soft Resin: This type of resin can also be hardened by sunlight or UV light. It can be used to create a wide range of items because it is flexible.
What Should You Look For In The Best UV Resin?
UV Resin Curing Time
The curing time will vary depending on the jewelry you are wearing. Curing resin for smaller jewelry pieces will take less time than larger, more bulky items.
Before you buy UV resin, make sure to check the curing times. This will tell you how long your project will take.
UV Curing Methods
Although UV resins can be cured in regular sunlight, it takes to cure them when exposed to ultraviolet light is much shorter. To cure your resin, you will need a UV-generating device.
You will need to buy UV flashlights, UV lamps, and even nail-curing light in addition to your UV resin.
Consider the impact of UV lamps on curing. A 4-watt UV lamp should be sufficient to cure the material in 2-3 minutes. You can search YouTube for video tutorials on the effectiveness of specific UV lamps that are quick curing.
UV Resin Kit
You should consider the kits you will need to make your jewelry. UV resin is not enough!
You will need to have a lot of pre-made molds and bezels. You should check whether the resin is compatible with silicone molds, resin molds, and polymer clays.
You can choose the best UV epoxy resin to make uv resin for jewelry by knowing what tools you have.
Before you buy any resin, it is essential to ensure safety. It doesn’t matter if you use it to make jewelry or any other purpose; it should be safe. It shouldn’t contain any toxic substances that could cause any adverse effects.
It should also be nontoxic nonradioactive. However, it is essential to be cautious when working with UV resin. While working with UV resin, it is best to wear protective eye gear, gloves, and masks.
The quality of the epoxy resin you purchase is essential to consider. It is necessary to buy epoxy resin from a reputable brand that guarantees. You can also check out the feedback and reviews of different brands before making your final decision.
Avoid purchasing if the review is negative. Also, make sure to check the expiry dates of resin. If it is expired or too old, the wax will not mix well, and you will lose your money. The resin will not work correctly, and your efforts and time will be wasted.
You’ve finished your resin artwork. Now you want to clean up the mess. UV resins can be easily cleaned up.
Before you start making resin jewelry, however, it is essential to remember the following:
Mix your UV resins using hard plastic. UV resins won’t stick to plastic.
Before you start working with resins, always wear gloves.
There are two options to clean up UV resin.
Dry & Peel
This simple method requires only silicone molds or wax paper. Spread the wax paper (or any other material) on your work surface.
Turn the container upside-down so that excess resin doesn’t fall onto it. Allow it to dry for several hours before removing any cured residues from your mixing container.
Your container is water-resistant, so you can remove the resin from the container until it is gone. Then, throw the extra polish in the trash.
After you are done making resin jewelry, wipe it off immediately with a piece of soiled tissue paper.
You should wipe as much resin off as possible. Take a towel and soak some acetone or rubbing alcohol in it.
Alcohol is a strong solvent, so the towel that has been soaked will remove any residues. Continue this curing process until everything is clean.
How to Cast a UV Resin Mold
It would help if you prepared your workspace before starting working with the UV resin. To protect your work surface, place a large piece of cardboard or a plastic sheet over it. Make sure that you have all the tools and materials that you require. You can now cast your UV resin.
You can use the packaging to pour the UV resin directly into the silicone molds to make a transparent mold.
First, pour the resin into a cup. Mix the wax with your preferred pigments. Finally, use a wooden stick to mix it all.
In your mold, pour a layer of UV resin 3 mm thick. Before curing, you can insert small items or other objects into the UV resin. You can use small stones and shells, dried flowers, glitter, and even confetti to decorate the resin.
The UV lamp light will cure the UV resin. Ensure that the resin piece is as close to the UV lamp light as possible. This curing process can take anywhere from a few seconds to several minutes. To test the hardness of resin, you can use a toothpick.
This step can be repeated several times to ensure that each layer is not more than 3 mm thick. You can gradually achieve the thickness you desire.
After the resin layer has dried, you can remove the silicone molds. It would help if you were careful as the casting can become very hot due to the chemical reaction.
Some Tips While Working With Epoxy Resin
UV Epoxy resin is a patience-intensive material that requires you to be patient. It will take time and effort to achieve perfect results. You can prevent air bubbles from forming by taking extra time to pour and harden the resin layer.
If air bubbles are formed, you can remove them with a hot dryer. Use the hairdryer to dry the resin quickly. You should not remain in the same place for longer than one second. This process should be done in a well-ventilated area.
The UV resin is more susceptible to heat than UV epoxy resin. It will become acrid if it is overheated. If you use a hot dryer, ensure that the temperature is shallow.
There is a possibility of blistering if you add different elements to the resin. To avoid blistering, ensure the pieces are placed flat on the resin layer. Then press the aspects into the unhardened resin.
Best Clear Uv Resin: FAQs
It would help if you considered several factors when UV curing resin. The curing time will depend on any embedded objects’ thickness and size. For jewelry and small pieces, it takes between 2 and 3 minutes for each layer of UV resin to cure.
The curing time will take between 4 and 6 minutes for larger pieces or thicker layers. The curing time will also be affected by temperature and humidity.
What UV Resin can I use to seal surfaces?
UV resin can be used as a protective layer for smaller surfaces. However, it is essential to apply a thin layer. A layer that is too thick will cause bubbles and holes that are almost impossible to remove. To apply a thin layer of UV resin, we recommend using a fine brush.
Which is Better: UV Resin or Epoxy Resin?
Although UV resin cures faster, it isn’t as durable as UV epoxy resin. UV resin can last about half a decade, while epoxy resin will last many years. UV resin is not resistant to heat and scratches.
Can I use any UV light to cure UV Resins?
To cure UV resin, you cannot use any Ultraviolet light. It must be of a specific intensity to achieve hardening. To cure most UV resins, you need a wavelength between 356 and 400 nanometers (nm).
Best Uv Resin: Conclusion
There is no one definitive answer to the best type of you. However, science is complex, and there are a lot of factors to consider. We have already mentioned several different types of your resins, but we have not talked about any others in the interest of time. Let’s read it carefully and choose the best one for your job.
Last update on 2023-09-23 / Affiliate links / Images from Amazon Product Advertising API